Table of Contents
Advertisement
6. When the AvivaTens XP is switched on, you hear a high-pitched tone. The screen
displays the total treatment time in hours and minutes for a period of 3 seconds
(Display 1). After 3 seconds the screen in Display 2 will appear on the screen.
7. To change the program, hold down the program selection button for at least 3
seconds. The user is then presented with each available program (1-5) in turn.
Note: You cannot change a program during treatment.
8. Programs 1 -5 are not limited in terms of time (Display 2).
9. If you wish to reset the total treatment time, press the Program Select and Lock but-
tons simultaneously for a period of 3 seconds. The total treatment time will reset to
zero (Display 3). The maximum total treatment time is 99 hours and 59 minutes. It
will reset back to 00:00 when the maximum treatment time is reached.
10. Slowly begin to increase the intensity on the channel you wish to use by pressing the
corresponding intensity control. As the intensity is being increased for a particular
channel, the stimulus will be felt from the corresponding electrodes and a channel
bar will rise and fall with the contraction/ relaxation cycles of the channel being
used. The level will be indicated (0 to 99) on the display (Display 4). The treatment
timer will begin once the intensity is first increased.
11. If necessary repeat the process for the other channel. The intensity level of each
channel is shown on the display.
Display 1
up to 3 seconds
Display 2
After 3 seconds
Display 3
Display 4
10
Hide quick links:
Advertisement
Table of Contents
