Unit Settings And Electrode Equipment For Your Therapy - Neurotech AvivaTens XP Instructions For Use & Warranty

UNIT SETTINGS AND ELECTRODE EQUIPMENT
Your personal therapy program is program no.
When switched on this can always be seen on the unit's
display!
Use the Burst function ( )
(possible with programs 2, 3)
Use the Trigger function ( )
(possible with programs 1, 4, 5)
Note: If the unit's display shows a different program from the
one prescribed by the clinician when you switch it on, please do
the following:
1. Switch the device off and on then again.
2. Hold down "P" button (for at least 3 seconds each time you want to change the program) until the program
prescribed by the clinician appears again. (The programs advance from 1 - 5 and not in reverse, 5 - 1)
3. Start the therapy
19
Yes No
Yes No