Settings - D-Link DSH-C310 User Manual

Section 3: Settings
To view your camera's settings, open the Omna app, go to the Settings menu, tap Accessory, then select your camera from the list.
Camera Image: You can tap on the camera icon to change the image used to identify your
camera.
Accessory Tap this to change the name used to identify your camera.
Name:
Accessory Tap this to change which room the camera is assigned to.
Room:
Set to my Tap this to mark this camera as a favorite for quick access to it.
favorites:
Motion Tap this to open the motion detection page, where you can enable
Detection: motion detection, define what areas to monitor, set the motion detection
sensitivity, and set the motion retrigger delay.
SD Recording: Tap this to open the SD settings page, where you can enable SD card
recording and format an inserted microSD card.
Time Zone: Tap this to set the time zone of the camera. This will help to ensure that the
correct time is used when marking recordings.
Firmware Tap this to go to the firmware upgrade page, where you can check for new
Upgrade: firmware and upgrade to a newer version if available.
Remove Tap this to remove the camera from your account.
Accessory:
D-Link DSH-C310 User Manual

Settings

9