Pair; Get Paired; Pair Second Device; Pair To Mac - Plantronics BackBeat GO 600 User Manual

Pair

Get Paired

Pair second device

Pair to Mac

The first time you power on your headphones, the pairing process begins.
1 Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
• iPhone and Android Follow the voice-guided pairing instructions.
• Other phones Use your phone's menu to:
®
2 Activate Bluetooth on your phone and set it to search for new devices.
3 Select "PLT BB600 Series."
If necessary, enter four zeros (0000) for the passcode or accept the connection. Once
successfully paired, you hear "pairing successful" and the LEDs stop flashing.
1 Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
2 Select "PLT BB600 Series" in your device's Bluetooth Settings.
If your Mac is Bluetooth enabled, you can pair your headset to it.
1 Place your headset in pair mode (slide and hold the power button towards the
Bluetooth icon). You will hear "pairing" and the LEDs will flash red and blue.
2 On your Mac, choose Apple menu > System Preferences > Bluetooth.
3 Click Set Up New Device or "+", select "PLT BB600 series stereo" and follow
the onscreen instructions.
3