Contents Inline controls overview Be safe Pair Get paired Pair mode Basics Power on or off Answer or end a call Adjust the volume Music and more Reconnect Mute the headset Redial Charge and fit Charge Get the best sound Wear the headset Headset Features Quick charge...
Inline controls overview voice Charge port Headset indicator light (LED) Center button: Play/pause music Center button: Activate voice dialing, search and other smartphone controls Center button: Answer/end/decline call Center button: Redial Center button: Power on/off Center button: Status check; battery level and connection status Volume up button: Skip to next track Volume up button: Increase volume Volume down button: Play previous track...
Pair Get paired The first time you power on your headset, the pairing process begins. Power on the headset by pressing the Center button until you hear "pairing" and the LED light flashes red and blue. Activate Bluetooth ® on your phone to search for new devices. •...
Music and more Listen to your music, podcasts, navigation and other streaming audio on your headset. NOTE Functionality varies by application. Play or pause audio Tap the Center button. Skip to next track Press the Volume up (+) button for more than 1 second.
Page 8
Restart track While audio is being paused, tap the center button, you hear the track restart. Play previous track Press the Volume down button until you hear the confirmation tone to restart the current track. Press the button twice (each press until the confirmation tone sounds) to go to the previous track. Access music and call controls Access the inline control with your right hand or left hand-whichever feels most natural.
Reconnect If your headset loses Bluetooth connection with your phone, it will automatically try to reconnect. If your headset can't reconnect, tap any key once or manually connect through the phone's Bluetooth. If your headset remains out of range for more than 90 minutes, the DeepSleep mode will activate.
Charge and fit Charge The door covering the charging port is located on the left side of the control panel. Open it with your fingernail. For best performance, fully charge your battery before use. It takes up to 2 hours to fully charge the headphones from a completely drained battery state. While charging, the indicator light is red and turns off once charging is complete.
Replace the eartip Push the eartip onto the earbud tip marked with the "L" or "R" with the notch on the rubber eartip lining up with the raised plastic notch in the earbud tip. Clean the eartip When eartips get soiled, it is recommended that you wipe the eartip with an alcohol wipe or a cotton swab dipped in Isopropyl alcohol.
Headset Features Quick charge Charge empty battery 15 minutes for up to a full hour of music listening. Pair multiple devices Your earbuds can pair and connect 2 devices. To enter pair mode after the first pairing process, start with the earbuds powered on and idle. Press and hold the Volume up and the Volume down buttons together until you hear 'pair mode' and the LED flashes red and blue.
Voice control Siri, Google Now ™ , Cortana When not on a call, press and hold the Voice button for 2 seconds until you hear the tone. Wait for the phone prompt to activate voice dialing, search, and other smartphone voice controls. Voice prompts Your headset tells you about status changes.
Once back in range with your phone, press the Center button button to exit DeepSleep mode. Install the app Get the most from your headset by installing our free mobile app, Plantronics Hub for iOS/ Android. Explore all of your headset's features, view instructions, and contact Plantronics support easily from your smartphone.
2017 Plantronics, Inc. BackBeat, DeepSleep, Plantronics, and Simply Smarter Communications are trademarks of Plantronics, Inc. registered in the US and other countries, and PLT is a trademark of Plantronics, Inc. iPhone and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.