Power And Pair; Power On The Case; Pair First Time; Pair Mode - Plantronics BackBeat PRO 5100 User Manual

Power and pair

Power on the case

Pair first time

Pair mode

Your charge case is shipped from the factory in a Deepsleep mode to conserve battery. Power on
your charge case to power your earbuds for first use.
Click and hold the charge case button for two seconds to power it on.
The charge case LEDs light up.
case
:02
The first time you take your earbuds out of the charge case, the pairing process begins.
Take the earbuds out of the case. The LED, located on the right earbud, flashes red and white to
1
indicate pairing mode.
Activate Bluetooth ® on your phone and set it to search for new devices.
2
• iPhone Settings > Bluetooth > On*
• Android ™ Settings > Bluetooth: On > Scan for devices*
NOTE
* Menus may vary by device.
Select "PLT BBPRO5100."
3
Once your right earbud is successfully paired, you hear "pairing successful" and "phone connected"
and the earbud LED stops flashing.
Select "Pair" or "OK" in the Bluetooth Pairing Request popup window to pair your left earbud.
4
You hear "pairing successful" when the left earbud is paired.
With your earbuds powered off, click and hold the right earbud until you hear "pairing."
1
LED flashes red and white.
Click and hold the left earbud for 2 seconds until you hear "power on."
2
To pair, select PLT BBPRO5100 in your phone's Bluetooth settings.
3
LED turns off and you hear "pairing successful" and "phone connected" when the right earbud is
paired.
Select "Pair" or "OK" in the Bluetooth Pairing Request popup window.
4
You hear "pairing successful" when the left earbud is paired.
NOTE You can connect your earbuds to only one device at a time.
PLT BBPRO5100
PAIR
4