Plantronics BackBeat GO 600 Series - Wireless Headphones Manual

Pair

Get Paired

The first time you power on your headphones, the pairing process begins.

1. Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
   

• iPhone and Android Follow the voice-guided pairing instructions.
• Other phones Use your phone's menu to:

2. Activate Bluetooth^® on your phone and set it to search for new devices.
3. Select "PLT BB600 Series."
   If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear "pairing successful" and the LEDs stop flashing.

Pair second device

1. Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
   
2. Select "PLT BB600 Series" in your device's Bluetooth Settings.

Pair to Mac

If your Mac is Bluetooth enabled, you can pair your headset to it.

1. Place your headset in pair mode (slide and hold the power button towards the Bluetooth icon). You will hear "pairing" and the LEDs will flash red and blue.
2. On your Mac, choose Apple menu > System Preferences > Bluetooth.
3. Click Set Up New Device or "+", select "PLT BB600 series stereo" and follow the onscreen instructions.

Charge and fit

Charge
It takes up to 90 minutes to fully charge your headset. The LEDs turn off once charging is complete.

TIP To check the headset battery status, tap the Call button while wearing your headset. Headset must be in idle state.

Your headset has up to 18 hours of listening time.

The basics

Headset overview

	Mute/unmute
	Volume up
	Volume down
	Play/pause music
	Track forward
	Track backward
	Bluetooth pair button
	Power on/off
	Bass boost
	Call button

Power on/off
Slide the switch to power on or off.

Play/pause music
Tap the Play/pause button.

Track selection
Press the Track forward or Track back buttons as desired.
NOTE Functionality varies by application. May not function with web-based apps.

Activate voice assistant
If your smartphone has a voice-enabled assistant, press and hold the Call button for 2 seconds and wait for the phone prompt.

Adjust the volume
To adjust the volume, tap the Volume up or Volume down button.

Adjust headset microphone volume (softphone)
Place a test softphone call and adjust softphone volume and PC sound volume accordingly.

Make/Take/End Calls
Answer or end a call
Tap the Call button or use your softphone.

Decline a call
Press and hold the Call button for 2 seconds.

Redial last outgoing call
Double-tap the Call button.

Mute
During a call, press the Volume up and Volume down buttons. You hear "mute on/off."

Find your headset
Most headsets are found under car seats, in pockets or on a messy desk. For less obvious locations, locate your headset by sending a tone to find it.

1. Download the Plantronics Hub app for iOS and Android by visiting plantronics.com/software.
2. Locate your lost headset by using Find MyHeadset within the Plantronics Hub app.

Support

NEED MORE HELP?
plantronics.com/support

Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States

Plantronics BV
Scorpius 171
2132 LR Hoofddorp
Netherlands

^© 2018 Plantronics, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth, SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.

Patents pending.

211818-06 (01.18)