Plantronics BackBeat FIT 3100 User Manual

Controls overview

Right	Primary earbud (pairs to phone)
	Play/pause * Click 1 time
	Next track * Click 2 times
	Previous track * Click 3 times
	Call answer/end Click 1 time
Siri/Google Now	Click and hold 2 seconds
	Power on Click and hold 2 seconds
	Power off Click and hold 4 seconds
	Pair With the earbud powered off, click and hold 4 seconds
	Reconnect to left earbud Tap each earbud 3 times
Left	Secondary earbud (connects to right earbud)
	Volume up Tap to increase levels (touch sensor)
	Volume down Touch and hold
	Power on Click and hold 2 seconds
	Power off Click and hold 4 seconds
	Reconnect to right earbud Tap each earbud 3 times

NOTE *Functionality varies by application. May not function with web-based apps.

Power, pair and charge

Power on the case

Your charge case is shipped from the factory in a Deepsleep mode to conserve battery. Power on your charge case to power your earbuds for first use.

Click and hold the charge case button for two seconds to power it on. The charge case LEDs light up.

Pair first time

The first time you take your earbuds out of the charge case, the pairing process begins.

1 Take the earbuds out of the case. The LED, located on the right earbud, flashes red and white to indicate pairing mode.

2 Activate Bluetooth^® on your phone and set it to search for new devices.

• iPhone Settings > Bluetooth > On*

• Android^™ Settings > Bluetooth: On > Scan for devices*

NOTE * Menus may vary by device.

3 Select "PLT BBFIT3100 Series."

Once successfully paired, you hear "pairing successful" and the earbud LED stops flashing.

Pair mode

With the headset powered off, click and hold the right earbud until you hear "pairing."

Charge

To charge your earbuds, place them in the charge case. Charge the case by plugging it into a computer or USB charging device. For fastest charging, plug them into a wall charger.

NOTE If the charge case has no charge, first charge the case separately, then charge the earbuds.

Install the app

Get the most from your earbuds by downloading our free app, BackBeat for iOS/Android.

• Stream a playlist, use a stopwatch, customize volume settings and more on your earbuds (MyTap)

• Change earbud language

• Turn settings on/off

• Switch earbud controls from the right earbud to the left earbud

• Find MyHeadset

• View the user guide

The Basics

Power on/off your earbuds

You can automatically or manually power on/off the earbuds.

• Automatic Taking the earbuds out of the case, automatically powers your earbuds on. Conversely, putting them back in the case automatically powers them off and starts charging them.

• Manual Click and hold the earbud button for 2 seconds to manually power it on. To manually power them off, click and hold for four seconds.

NOTE Turning off the right earbud, turns off the left earbud. To power on, power the earbuds on individually.

Power transfer

If your right earbud loses power, all functions and audio transfers to the left earbud.

Adjust the volume

The left earbud has a touch sensor button. Only a light touch is required.

1. To increase volume, tap the left earbud.
2. To decrease volume, touch and hold the left earbud.

Play or pause audio

Click the right earbud.

NOTE Functionality varies by application.

Track selection

Double-click the right earbud to skip to the next track or triple-click the right earbud to play the previous track.

NOTE Functionality varies by application. May not function with web-based apps.

Make/Take/End Calls

Answer or end a call

Click the right earbud.

Answer a second call

First, click the right earbud to end current call, then click the right earbud again to answer new call.

User Siri, Google Now

Your earbuds support Virtual Personal Assistants (VPA) such as Siri and Google Now.

Click and hold the right earbud for two seconds to use your device's VPA.

DeepSleep mode

If you leave your earbuds powered on but out of range of your paired device, they conserve power by entering DeepSleep mode after 120 minutes and power off mode after 7 days.

To exit DeepSleep mode, choose:

• After 120 minutes, power on each earbud.

• After 7 days, reset by powering off and on.

Switch controls for better audio

For best Bluetooth performance, keep your phone/audio device on the same side of your body as the primary earbud.

Your right earbud is the primary earbud by default. It pairs to your phone/audio device and the left earbud automatically connects to the right.

If your prefer having your phone/audio device on the left side of your body, use the Switch Primary Earbud feature in the BackBeat app to make the left earbud the primary earbud. This moves the Bluetooth connection as well as primary controls to the left earbud and move the volume and My Tap controls to the right earbud.

Support

NEED MORE HELP?

plantronics.com/support

Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States

Plantronics B.V.
Scorpius 171
2132 LR Hoofddorp
Netherlands

^© 2018 Plantronics, Inc. BackBeat and Plantronics are trademarks of Plantronics, Inc. registered in the US and other countries, and Plantronics Hub is a trademark of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.

Patents pending.

213298-06 (08.18)