Connect To The Internet - AT&T Velocity 2 User Manual

Connect to the Internet

You can connect up to 10 wireless devices, such as smartphones,
laptops, tablets, digital cameras, printers, gaming consoles, and
digital picture frames, to your mobile hotspot's Wi-Fi network(s).
(See Set Maximum Number of Connected Devices on page 18 for
instructions on setting connections for the Main Wi-Fi and Guest
Wi-Fi networks.)
To connect a wireless device, you can manually enter the password,
or you can use WPS to connect a WPS-enabled device without the
need for a password. (See Connect a WPS-Enabled Wireless Device
on page 10.)
Note: You can also connect a single device directly to your
Velocity 2 using the USB Type-C cable.
Connect Wireless Devices to Your Mobile Hotspot
1. Power on your Velocity 2 by pressing and holding the Power
button for 2 seconds, until the screen turns on.
Your Velocity 2 will automatically search for and connect to your
network provider's mobile broadband network.
2. Connect your computer or other wireless device(s) to
your network. (Steps may vary by device.)
a) On the home screen of your Velocity 2, locate the Main Wi-Fi
network name and password.
GET STARTED 9