Set Up And Connect To The Internet; Optional Autorun Installation (For Usb Use Only) - AT&T Velocity User Manual

Set Up and Connect to the Internet

Install the Battery
Remove the back cover.
Insert the battery as shown with
the contacts located against
the metal springs, and press the
battery down into the case.
Replace the back cover.
Note: The battery comes partially charged and ready to go.
When the battery needs recharging, follow the instructions in
Recharge the Battery on page 32.
8
Optional Autorun Installation
(For USB use only)
Power on the mobile hotspot and connect it to your
computer with the USB cable.
When prompted, tap OK on your device.
Click AT&T Velocity from the popout menu.
Click Run AutoRun.exe from the popout menu.
The tips displayed in the status bar show the installation
progress of the software. You may see the following
messages:
• Device is initializing...
• Create ShortCut...
• Running webGUI...
The hotspot automatically installs a desktop shortcut to the
PC and opens the AT&T Wi-Fi Manager home page in your
browser.
Note: You can also manually install by double clicking the
AutoRun.exe located in the CD drive under My Computer.
Once installation is complete, disconnect the device from
your computer.
Get Started Get Started 9