Replace The Sim Card - AT&T Velocity 2 User Manual

Replace the SIM Card

Your Velocity 2 comes with the nano-SIM card preinstalled.
If you need to replace the nano-SIM card, follow
these steps:
1. Power off your Velocity 2. Insert
the tip of the tray eject tool
into the hole next to the
card tray.
2. Pull out the card tray. Remove
the existing nano-SIM card
(if present).
3. Insert the new nano-SIM card.
Note: You can also insert a
microSDXC card (sold separately)
in the card tray, as shown.
4. Carefully slide the tray back
into place.
USE YOUR VELOCITY 2
microSDXC
card
Nano-SIM
card
37