AT&T Velocity 2 User Manual page 15

3. On the wireless device you wish to connect, press the
WPS button.
4. On the Velocity 2 touch screen, tap OK.
Your mobile hotspot and the wireless device will communicate and
establish the connection.
Note: You can also initiate a WPS connection from the Velocity 2
touch screen without pressing the button. From the home screen,
tap Wi-Fi Main Wi-Fi Network or Guest Wi-Fi Network WPS
Pair with Main Wi-Fi or Pair with Guest Wi-Fi.
From the AT&T Wi-Fi Manager:
1. On a connected device, log in to the AT&T Wi-Fi Manager.
(See AT&T Wi-Fi Manager on page 8.)
2. Click Settings in the navigation menu.
3. Click Wi-Fi Basic.
4. Under either Main Wi-Fi Network or (if Guest Wi-Fi is enabled)
Guest Wi-Fi SSID, locate the WPS Mode section.
5. Choose a WPS connection method:
• If the wireless device you want to connect has a WPS button,
click WPS Push Button, and then within 2 minutes, press the
wireless device's WPS button.
• If the device you want to connect has a WPS PIN associated
with it, click the PIN field and enter the device's PIN. Click
Enter WPS PIN. Your mobile hotspot and the wireless device
will communicate and establish the connection.
GET STARTED 11