MicroNet SP5008B Installation Manual

Network Configuration
Step 1:
Go to [ Device Setting > Network
connection type (static IP, DHCP, or PPPoE) according to your
ISP or actual network.
Step 2: Press the Apply button after you finish configuration.
Step 3: Go to [ Maintenance/Reboot
Apply button.
Note:
• When you select PPPoE mode, then fill out the fields of
PPPoE userID and PPPoE password for PPPoE
authentication.
•When the gateway cannot get IP by DHCP or PPPoE,
original static IP address is accessible via the LAN port.
Step 2: FXO Registration
Go to [ SIP Trunk ] for FXO port registered SIP trunk number.
Press apply button after you finish configuration
Step 3: Go to [ Maintenance/Reboot
Apply button.
----------For more details, please refer to user manual --------
1.Go to http://www.micronet.com.tw-->Support->Download
Center->Product name search --> "SP5018B"
2 Scan QR code .
WEEE Directive & Product Disposal
At the end its serviceable life ,this product should not be treated
as household or general waste. It should be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment, or returned to the supplier for disposal.
P/N: 2300-0754
], and select the right
], option and press the
5
.
], option and press the
7
Service Registration
Step 1: FXS Registration
Go to [ TEL Setting FXS Line >
telephon number. Press apply
Go to [ TEL Setting > SIP Proxy
here, if this VoIP gateway wants to use SIP Proxy service to
transfer the VoIP call. Press apply
configuration.
Quick Installation Guide
IP Telephony Gateway
Model No.: SP5008B/SP5018B/SP5058B
] for FXS port registered
button after you finish сonfiguration
] and set the server information
button after you finish
6
w w w . m i c r o n e t . i n f o
.