Installation (Din Front Mount) - Virtual Reality VRCD400-SDU Owner's Manual

INSTALLATION
DIN FRONT-MOUNT (Method A)
1. Dashboard
2. Mounting
Sleeve
Follow the diagram in Fig. 2 for in-
stalling the rear mounting strap to the
head unit. The rear mounting strap
will help keep the head unit from
moving around inside the dashboard.
Fig. 3
Bend the tabs
to secure the
Mounting Sleeve
in the dashboard.
3. Screw
Fig. 1
Insert fingers into the groove in the front of frame to remove it.
After inserting the Mounting Sleeve
into the dashboard, select tabs on
top, bottom, and sides, then bend
them to secure the mounting sleeve
in the dash board.(Fig. 1)
Fig. 2
Insert the keys supplied with the unit in the
grooves on both sides. The unit can be installed
or removed from the dashboard using these
keys.(Fig. 3)
5
1. Dashboard
2. Nut (5mm)
3. Spring washer
4. Screw (5 x 25mm)
5. Screw
6. Strap
7. Plain washer