3.4. LED Indicators
PWR: Red LED, lights up when DVR is powered on, and goes out when power is cut off.
RUN: Keeps on when DVR is being launched and flashes when DVR is running.
ALM: Alarm indicator. It keeps on with the record when there is Alarm-in, G-sensor activation or
motion detection or speed or panic button event alarm.
GPS: Lights up when GPS is running. (DV425GPS)
CH1~4: Lights up when corresponding camera is running.
SD1~4: Lights up when corresponding SD card is available, and flashes when recording.
WIFI: WIFI indicator. It always lights up when uploading data and off when WIFI has been off or WIFI
module in abnormal status.
3.5. LCD Monitor
EDID (Extended Display Identification
Data) is automatically acquired
when powered on. DVR will read
the recommended resolution
of the monitor at startup. If the
recommended resolution of the
monitor is 1080P, the DVR output will
be 1080P; otherwise it will be 720P.
1. HD monitor power button, LED
red for standby mode, and green for
working mode.
2. HDMI connector.
3. HDMI cable.
4. HD monitor 6pin aviation cable
connector, with Power and Video/
Audio pin.
9