Table of Contents
Advertisement
4.7. Panic Button (Optional)
Overview
The LEDs are used to show the device's working status. But when the device is installed in
the vehicle, it is not easy to check the LED on the front panel. Each of the LED indicates the
corresponding status. Furthermore, the panic button on the panel make it easier to trigger alarm for
emergency or bookmarking a manual event.
Pin Definition
2*5 PIN/3.0 interface connect to the interface on panic button.
LED
LED
VLoss
Rec
GPS
Mem
Comm
Power
Error
Event
Color
Amber
Soft green
Amber
Red
Amber
Pale Blue
Red
Red
ON
Any of the cameras
have no signal alarm
Recording Normal
driving
GPS cannot latch
Storage Alarm or no
Storage device
Device is not
connected to server
Device has power
Error with device
Event-based
Recording (remains lit
during Event)
18
OFF
Normal Operation
Not recording
Normal Operation
Normal Operation
Normal operation
or device is not
connected to server if
this feature is disabled
Device does not have
power
Normal Operation
Normal Operation
Advertisement
Table of Contents
