6.1. Power On Rec
Recording will start when power is on if set the 'Power On Rec' ON. Default is ON.
6.2. Cyclic Rec
New video files will overwrite the previous ones when disk is full if setting the Continuous Rec ON.
Recording will stop when disk is full if setting the Continuous Rec OFF. Overwriting will not cover event
recording files.
6.3. Event Rec
Event recording type includes motion detection triggered alarm, G-sensor triggered alarm, alarm 1 ~
8 triggered alarm, panic button triggered alarm and over speed alarm. If the event switch is on and
corresponding alarm parameters are set, event recording will be activated when above events are
triggered. If the event switch is off, event recording will not be activated even if the event
is triggered.
26