Event Duration; File Length; Motion Sensitivity; G-Sensor Sensitivity - Axis DV425GPS Instruction Manual

6.6. Event Duration

When alarm recording is on, the video file length can be set to 5s, 10s, 15s after the event happens.

6.7. File Length

When normal recording is on, the video file length for each file can be set to 5mins, 10mins, 15mins.

6.8. Motion Sensitivity

Motion detection recording and sensitivity level setting: When there is an object moving and its
movement amplitude exceeds the preset motion detection sensitivity level, event recording will be
triggered. For this kind of event record or alarm record, the pre-record time will be set as 15s and the
post-event time is configured by Event Duration above.
Total video file length = pre-recording file length(fixed 15s) + file length (configured by Event Duration).
If motion detection is off, event recording will not be triggered. Motion detection sensitivity can be set
to two levels, middle / high. Motion detection recording is on when middle / high is selected. Motion
detection recording is off when OFF is selected.

6.9. G-Sensor Sensitivity

G-sensor triggered recording and sensitivity level setting: When the acceleration or gyroscope of
the G-sensor reaches the preset sensitivity value, G-sensor recording will be triggered. For this kind
of event record or alarm record, the pre-record time will be set as 15s and the post-event time is
configured by Event Duration above.
Total video file length = pre-recording file length (fixed 15s) + file length (configured by
Event Duration).
If G-sensor triggered recording is off, event recording will not be triggered. G-sensor sensitivity can be
set to two levels, low / high. G-sensor triggered recording is on when low / high is selected. G-sensor
triggered recording is off when OFF is selected.
29