Table of Contents
Related Manuals for Axis Camera Station S1016 Mk II
Summary of Contents for Axis Camera Station S1016 Mk II
- Page 1 AXIS Camera Station S10 Recorder Series AXIS Camera Station S1016 Mk II Recorder AXIS Camera Station S9002 Desktop Terminal AXIS Camera Station S9101 Desktop Terminal AXIS Camera Station S9201 Desktop Terminal Installation Guide...
- Page 2 • find answers to resolved problems in the FAQ database. Search by product, category, or phrase • report problems to Axis support staff by logging in to your private support area • chat with Axis support staff •...
-
Page 3: Hazard Levels
AXIS Camera Station S10 Recorder Series Safety information Hazard levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. - Page 4 • When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product. The Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years.
- Page 5 WARNING • Risk of explosion if the battery is incorrectly replaced. • Replace only with an identical battery or a battery which is recommended by Axis. • Dispose of used batteries according to local regulations or the battery manufacturer's instructions.
-
Page 6: Installation Steps
Installation Guide This Installation Guide provides instructions for installing AXIS S1016 Mk II, AXIS S9002, AXIS S9101 and AXIS S9201. For other aspects of using the product, go to www.axis.com Installation Steps 1. Make sure the package contents, tools and other materials necessary for the installation are in order. -
Page 7: Product Overview
USB 2.0 connectors (2) USB 3.0 connectors (2) Drive activity light Power-supply diagnostic light Power-supply diagnostic button Power connector 10 Backpanel connectors, see page 11 11 Graphic card, see page 10 (AXIS S1016 Mk II) or page 11 (AXIS S9002) - Page 8 AXIS Camera Station S10 Recorder Series Front and Back AXIS S9101 Power button, power light Drive activity light Universal audio jack connector Line out connector USB 3.1 (2) Kensington lock slot Padlock ring Network connector USB 3.1 connectors (4) 10 Display port 1.2 connector 11 HDMI 1.4 connector...
- Page 9 AXIS Camera Station S10 Recorder Series Front AXIS S9201 SD card slot USB 3.0 Universal audio jack Microphone OSD buttons Drive activity light Power button Front power indicator...
- Page 10 AXIS Camera Station S10 Recorder Series Back AXIS S9201 Chassis lock support Power diagnose LED Power connector Network connector USB 3.0 HDMI 1.4 Display port 1.2 Audio out Graphics Card Panel AXIS S1016 Mk II DVI-I connector DisplayPort connector...
- Page 11 AXIS Camera Station S10 Recorder Series Graphics Card Panel AXIS S9002 Mini DisplayPort connectors (4) Back Panel AXIS S1016 Mk II / AXIS S9002 PS/2 mouse connector Network link integrity light Network connector Network activity light USB 2.0 connectors (2)
-
Page 12: Connect The Cables
Connect the Cables Important Before you begin any of the procedures in this section, read the safety information that shipped with your computer. For additional information, see www.axis.com Note Some devices may not be included if you did not order them. -
Page 13: Set Up Software
Network Configuration AXIS Camera Station can record and play back video from cameras and video encoders that are connected to a LAN (Local Area Network) or to a WAN (Wide Area Network). Depending on the installation, follow the instructions under Network & Security Configuration in... -
Page 14: Specification
Note Make sure that AXIS Camera Station server is running on AXIS S1016 Mk II / AXIS S1032 Mk II / AXIS S1048 Mk II Recorder before you follow the steps below. 1. Start AXIS Camera Station Client. 2. Connect to the S10 Recorder. For more information, see the built-in help and AXIS Camera Station User Manual available at www.axis.com. - Page 15 AXIS Camera Station S10 Recorder Series AXIS S9101 AXIS S9201 AXIS S1016 Mk II/AXIS S9002 Voltage 100 V AC to 240 V AC 90 V AC to 264 V AC 90 V AC to 264 V AC Coin-cell battery 3 V CR2032 lithium...
-
Page 16: Further Information
The user manual is available at www.axis.com • To check if there is updated firmware available for your product, see www.axis.com/support • For useful online trainings and webinars, see www.axis.com/academy Warranty information For information about Axis’ product warranty and thereto related information, go to www.axis.com/warranty/... - Page 18 Installation Guide Ver. M3.4 AXIS Camera Station S10 Recorder Series Date: April 2017 © Axis Communications AB, 2015 - 2017 Part No. 1735049...