Reading And Transferring Data - Bosch TDL 110 Operating Instructions Manual

Transport Data Logger TDL 110

6.5 Reading and Transferring Data

6.5.1 Reading the Data
1. Connect your smartphone to a configured TDL.
TIP – Overview Screen
This screen provides an overview of the four parameters, showing you
at a glance if any violations have occurred during the logging period.
Green check marks indicate that no violation has occurred, whereas
an exclamation mark indicates that the limit values have been
exceeded at least once during the logging period. If an icon is shown
grayed out, no limit value has been defined for this parameter.
2. Tap Download details.
3. Confirm Stop logging & download.
4. Enter your PIN.
Risk of Data Loss!
An interrupted connection can cause damage to data.
⇒ Do not lock your phone while downloading data.
5. Tap Show details. The summary screen appears.
6. Tap the desired measurement parameter to view those
measurements.
7. Tap an entry date for more detailed information.
BCDS-TDL110/0001 (2017-09)
NOTICE
13 | 20