Cleaning The Brushroll - Shark Powered Lift-Away NV800ANZ Instruction Manual

MAINTENANCE
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing.
TIP: You can also check
for blockages in the hose
and tubes. Just remove
floor nozzle, dust cup and
hose and shine a flashlight
in the openings.
19
AUST: 1800 890 840

CLEANING THE BRUSHROLL

1
Press down on the two buttons on the floor nozzle to pop
up the brushroll garage lid.
2 Lift the brushroll out by the tab on the left side. To remove
any string, hair or debris that may be wrapped around
the brushroll, use the onboard hair removal tool. The tool
is located in a compartment on the nozzle, above the
brushroll.
3 To reinstall the brushroll, return it to the brushroll garage.
Press down on the brushroll garage lid until you hear it click
into place.