Maintenance; Emptying The Dust Cup - Shark Powered Lift-Away NV800ANZ Instruction Manual

MAINTENANCE

To keep your vacuum's
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing.
Hand wash with
water only to prevent
damage from
cleaning chemicals.
Allow ALL filters
to dry completely
before replacing
in the vacuum to
prevent liquid from
being drawn into
electric parts.
IMPORTANT: Do not use
soap when cleaning the
HEPA filter.
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFF680
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF680
Clean once a year.
17
AUST: 1800 890 840
STEP 1

EMPTYING THE DUST CUP

1
Pull up on dust-cup
release latch and lift dust
cup off pod.
STEP 2
2 Hold dust cup over a trash
bin and press the bottom
dust-cup empty latch.