Table of Contents
Advertisement
MX-0808-PP-AUD
WyreStorm 8x8 HDBaseT matrix Switcher with
S/PDIF Digital and Analog Stereo Audio Outputs,
2-Way IR and RS232
Instruction Manual
Thank you for choosing this WyreStorm product.
Please read these instructions carefully before installing to avoid complications later.
1
US/CAN/MEX: +1-518-289-1294
Toll Free Technical Support: +1-844-280-WYRE (9973)
Advertisement
Table of Contents
Related Manuals for Wyrestorm MX-0808-PP-AUD
Summary of Contents for Wyrestorm MX-0808-PP-AUD
- Page 1 WyreStorm 8x8 HDBaseT matrix Switcher with S/PDIF Digital and Analog Stereo Audio Outputs, 2-Way IR and RS232 Instruction Manual Thank you for choosing this WyreStorm product. Please read these instructions carefully before installing to avoid complications later. US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
-
Page 2: Table Of Contents
IR, LAN or serial distances up Package Contents to 70m/230ft using a single Cat5e/6 cable. Specifications The MX-0808-PP-AUD enables any of its 8 HDMI inputs to Front Panel be distributed independently and simultaneously to any of Rear Panel... -
Page 3: Features
Units contain non-servicable parts - Refer all servicing to leading control systems qualified service personnel. • LAN control – with intuitive new WyreStorm web interface enables real time matrix I/O switching and configuration • Choose from multiple switching methods – infrared remote... -
Page 4: Package Contents
Package Contents • 6 / 8 x IR RX Emitters (larger sensor for Output display) *downloadable versions can be found at www.wyrestorm.com • 1 x Wyrestorm matrix remote control incl. battery (size/type: • Matrix mounting brackets CR2025 3V) • 1 x 100~240V AC Power cable power supply •... -
Page 5: Front Panel
Front Panel LED Input/Output Select Screen Output Select Buttons (Left/Right) IR Receive Window Enter Selection Buttons Input Select Buttons (UP/DOWN) Rack Brackets ENTER Rear Panel HDBaseT Output (RJ45 Cat5e/6) RS485 port Analog L/R Stereo Output LAN port SPDIF Optical Output RJ45 to RS485 definition indicator HDMI Input ports RS232... -
Page 6: Typical Application
Typical Application Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343... -
Page 7: Connection
Connection Mains Power NOTE: Make sure the IR jacks are in the same Connect each HDMI input source to the HDMI number ports. inputs of the MATRIX. Do Not Hotswap plugs! - Please insert and HINT: Locate the infrared sensor on devices by extract cables carefully with the power SWITCHED shining a flashlight onto the display panel of OFF. -
Page 8: Basic Operation
If there is electrical interference or cable both ends from the HDBT Output port of the MATRIX to bends/kinks within the set up the IR is one of the the UTP or HDBT IN of the WyreStorm HDBaseT Class B first functions to fail. DISPLAY RECEIVER. -
Page 9: Remote Control At The Display End (Remote Ir)
/ next buttons are used to scroll between the US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973) Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343 display. So for example, using the previous / next buttons for 1 s connected to the matrix for each individual output allows you to select the source to be set to display 1 manu-ally. - Page 10 Displays from Multiple Locations receivers located remotely, it also passes IR control The Wyrestorm MX0606/0808-PP is not only a switcher and signals through the IR call-back system to the matrix Single Cat5e/6/7 extender of multiple HDMI signals to multiple HDMI receivers...
-
Page 11: Ir Extender Control
Cat5e/6/7 cable. making sure the receivers themselves are placed in by accessing the Wyrestorm COMCTL software. See remote handset used control the display outputs. outputs. clear view at the to receive an infrared signal from the ADVANCED OPERATION remote handset used control the display outputs. -
Page 12: Advanced Remote Control
Typically, unless alternative methods of controlling the matrix are or data manually input should such problems arise, as well as These can be obtained through the Wyrestorm website, by input them manually. chosen or problems with device communication through the matrix Please note: Due to the differing method of control based on configuring the system for third party control. - Page 13 (display) and Input port select (source) buttons for specific is connected to COM CTL. The firmware version and creation date will be displayed together with the Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343 normal output state of the matrix.
- Page 14 (70m / 230ft using RX-1UTP-IR-70), switching compatibility with outputs. Long Cable Mode to ON will instruct the matrix to attempt Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343 to improve transmission over the UTP in an effort to improve IR CALL-BACK –...
- Page 15 Although this setting can be used to fix EDID communication problems, we recommend this setting NOTE: To access matrix control over LAN, enter the Technical Support: support@wyrestorm.com US: +866 6 Technical Support: support@wyrestorm.com US: +866 6 for system debugging by the installer only, and not for...
- Page 16 (for example if using third party control If the control command is sent successfully, the current Technical Support: support@wyrestorm.com US: +866 6 If the control command is sent successfully, the current output Receives the specific IR code used to operate the Matrix via...
-
Page 17: Read Status Command
‘\r’ ‘\n’ If the control command is sent successfully, the current output ix via If the control command is sent successfully, the current output x via If the control command is sent successfully, the current output This translates as: state selected will feedback to show the in-put port selected. The x via hird state selected will feedback to show the in-put port selected. -
Page 18: Lan Control Using Wyrestorm Web Ui And Third Party
IP address to the system and you will return to IP drivers and full user guide on the WyreStorm Web UI. For example: If OUTPUT 3 is selected for INPUT 1, the the previous screen or EDID for OUTPUT 3 will be copied to INPUT 1 –... - Page 19 1 2 3 4 The matrix will use embedded 1080p video 1 2 3 4 Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343 turn on for EDID settings to take effect. 1 2 3 4 EDID to output a signal.
-
Page 20: Troubleshooting
– Please use power supplies included. termination will result in unstable operation or a blank screen. NOTE: The MX-0808-PP-AUD is not PoH enabled and does not support remote powering of display 8) Electrical interference – HDBaseT is less susceptible receivers. - Page 21 If outputting 7.1, make sure all devices connected are also outputting 7.1 not be compatible. Always use WyreStorm components included with your purchase or check compatibility of third party control systems with your WyreStorm dealer. US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
-
Page 22: Faq
HDBaseT technology only requires a single cable; all environmentally friendly. features associated with twin cable are supported with Are WyreStorm products compatible with HDMI 1.4? the added benefit of RS232 control and Ethernet on 100m/328ft HDBaseT products, with 70m/230ft HDBaseT HDMI 1.4 refers to a list of ‘features’... -
Page 23: Maintenance
NOT recommended. (HDMI Control Protocol) to the outgoing signal, this can sometimes have an effect on the HDMI signal. • All WyreStorm equipment support HIGH-SPEED Maintenance (or “category 2”) HDMI cables that have been tested to perform at speeds of 340Mhz or up to 10.2Gbps,... -
Page 24: Warranty
DOES NOT COVER normal wear and tear or cosmetic WyreStorm will not be liable for any use of this information damage. or any changes it may make to those products. The use... -
Page 25: Installation Reference Log
Wyrestorm Matrix INPUT installation reference log INPUT Input Source Location Source Details Source resolution & audio Cable number on settings Number Matrix US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973) Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343... - Page 26 Wyrestorm Matrix OUPUT installation reference log OUTPUT Output Output Location Display Details Display Resolution & Audio Cable number on Settings Number Matrix Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343 Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343...
-
Page 27: Installation Notes
Installation Notes US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973) - Page 28 US: +1 844-280-WYRE (9973) UK:- +44 (0) 1793 230 343 Email: support@wyrestorm.com WyreStorm Technologies reserve the right to change physical appearance or technical specification of this product at any time. Visit wyrestorm.com for the latest information on products.. 150729 Technical support: support@wyrestorm.com...
Need help?
Do you have a question about the MX-0808-PP-AUD and is the answer not in the manual?
Questions and answers