Preparing The Environment; Pxi Modules; Verifying The Kit Contents - National Instruments SwitchBlock Getting Started Manual

Preparing the Environment

Ensure that the environment in which you are using the NI SwitchBlock meets the following
specifications:

PXI Modules

Operating Environment
Ambient temperature range
Relative humidity range
Maximum altitude
Pollution Degree
Indoor use only.
Note Refer to the device specifications on ni.com/manuals.

Verifying the Kit Contents

The items shown in the following figure are necessary to set up and use your NI SwitchBlock.
1. NI SwitchBlock Carrier
2. NI-SWITCH Driver Software DVD
Figure 1. SwitchBlock Carrier Kit Contents
1
3
0 °C to 55 °C (Tested in accordance with
IEC 60068-2-1 and IEC 60068-2-2.)
10% to 90%, noncondensing (Tested in
accordance with IEC 60068-2-56.)
2,000 m (at 25 °C ambient temperature)
2
2
4
3. NI SwitchBlock Getting Started Guide
4. Safety, Environmental, and Regulatory
Information
NI SwitchBlock | © National Instruments | 3