|
TMA1 controller > RS232 settings
10
RS232 Port Settings...
The RS232 Controller offers two bidirectional RS232
interfaces which you need to configure as required by
the products you want to control or system controller
you want to use:
RS232 input uses a 9 way, female D-Sub connector
with this pin layout:
2 RX
3 TX
5 Ground
RS232 output uses a 9 way, male D-Sub connector
with this pin layout:
2 TX
3 RX
5 Ground
Both interfaces support 4800, 9600, 19200, 38400,
57600 and 115200 Baud, with Data Bits 7 or 8,
Parity Odd, Even or None and Stop Bits 1, 1.5 or 2.
The baud rate of the RS232 input and RS232 output
can be independently configured, a 1000 Byte buffer
allows data to be relayed even when input and output
ports have different Baud rates.
Need help?
Do you have a question about the TMA1 and is the answer not in the manual?