Ir Learning - TAG MCLAREN AUDIO TMA1 Owner's Manual

|
TMA1 controller > IR learning
12
IR Command Learning
The AV32R DP, connected to the TMA1 Controller, can
learn many IR commands by 'listening' to them. Please
connect the IR transmitter supplied with your TMA1
Controller to the output IR-TX and stick the transmitter
close to the infrared receiver of the product you want
to control.
If you need to control more than one product using IR commands
then you need to connect an active IR distribution controller, such as
those available from Xantech, to the IR-TX output.
Select IR Command Learning which brings up a
submenu, allowing you to
- Learn a new IR Command
- Delete a Learnt IR Command
- Edit the Name of a Learnt IR Command
Please note, RC5 commands, as used by TAG
McLaren products and many others, can directly
be entered into a Macro definition, as this saves
valuable memory.
If you are unsure if your product uses an RC5
protocol, try to learn it as RC5 as shown on page
25 and if it fails, learn it as described here.
IR-transmitter