Table of Contents
Advertisement
Learnt Infra red Command
Chaining Macros
You can chain, i.e. run one macro after
another if you find that the 8 commands per
macro are insufficient or if you find that you
reprogram an independent sequence all the
time, e.g. switching your tv on and then
selecting a specific input.
The TMA1 Controller chains
macros, it doesn't nest them, i.e. a
macro chained is executed after the
macro you call it from is finished.
If you make recursive calls, the TMA1 Controller will fail.
TMA1 controller > macro: learnt IR / chaining
You can assign any of the IR commands
you have learnt, as shown on the left.
Select Delay to pause the controller for a
given time before processing the next
command, which is often required when
sending several infra red commands in a
sequence.
|
27
Advertisement
Table of Contents
