Table of Contents
Advertisement
|
TMA1 controller > IR learning
14
As soon as you have pressed the
ok/normal button, the screen shown
on the right will come up, advising
you to get ready to press the button of
the IR remote control you wish to
learn.
Make sure you point the remote at the
TMA1's IR learning sensor, located
above the TAG McLaren Logo (see
picture on page 15, sensor indicated
by arrow).
Don't press the button until the
message changes to Press and Hold
Key Now. Now keep the button
pressed until the next screen appears,
informing you that the command has
been successfully learnt.
Advertisement
Table of Contents
