Table of Contents
Advertisement
|
TMA1 controller > macro: RC5 / TAGtronic Bus
26
TAGtronic Bus Commands
TAGtronic Bus commands are specified to the
TMA1 Controller in analogy to their RC5
commands.
A full list of all RC5 commands TAG McLaren
products understand can be found at
www.tagmclaren.com. Just visit the club and
go there to the hotlink infra red remote codes
All you need to add is the Destination Group and if not BCAST (which means all products),
the Destination Unit ID, e.g. 1. Select Unit ID =0 if you want to talk to all products of the
same group:
Allowed Destination Groups are: BCAST (=all), DVD, AVP, AMP, PREAMP
Allowed Destination Unit IDs are: 0 (=all), 1,2,.....9
The factory setting of the Bus ID for all TAG McLaren products is 1. You can assign a
different Bus ID for AV32R DP, AV192R, DVD32R, DVD32FLR, 100x5R, 250x3R and
250MR.
1. The DPA32R only responds to the group BCAST
and TUNER
(1)
Advertisement
Table of Contents
