|
TMA1 controller > controlling other products
8
four ways to get results...
There are four ways the TMA1, connected to the AV32R Dual Processor, can control
other products:
TAGtronic Bus messages
RS232 messages
this is the protocol TAG McLaren products
use to communicate with each other.
There are also controllers from other
manufacturers, such as AMX, which offer
TAGtronic Bus implementations.
The TMA1 Controller can be used to
generate TAGtronic Bus messages, for
details see paragraph Macros on page 20.
The TMA1 Controller can control products
via RS232 messages. Please refer to the
handbook of the product you want to control
to find the necessary RS232 command
settings. The AV32R DP can also be
controlled via RS232 commands, for details
see page 34.