Table of Contents
Advertisement
ULXD6 ULXD8
Boundary and Gooseneck Base Transmitters
*MX400R series gooseneck microphones (red LED) do not offer this setting.
④ Low-Battery LED
•
Off = More than 30 minutes of battery life remain
•
On (red) = Less than 30 minutes of battery life remain
•
On (green) = Microphone docked on charging station
•
On (amber) = Battery is missing or is not inserted correctly
⑤ Infrared (IR) Port
Align with receiver IR port to send settings to transmitter.
⑥ Charge Connector
Connects to networked chargers and USB power supply.
⑦ Gooseneck Microphone
ULXD8 base fits 5", 10", and 15" Microflex series microphones, available in single or dualflex and with bi-color or red-only LEDs. See Model Variations for full
list of gooseneck options.
Connecting Gooseneck Microphone to ULXD8 Base
ULXD8 base transmitters fit 5", 10", and 15" Microflex series gooseneck mi-
crophones, available in single and dualflex models.
Connect microphone to base as shown.
Boundary Microphone Placement
The boundary transmitter sits on a table or desk to transmit speech while discreetly blending into any conference environment. Cardioid and omnidirectional
versions are available.
For best low-frequency response and rejection of background noise, place the microphone on a large, flat surface, such as a floor, table, or lectern.
To reduce reverberance, avoid reflective surfaces above or to the side of the microphone, such as beveled sides of pulpits or overhanging shelves.
ULXD6/O
46 cm
(18 in.)
46 cm
(18 in.)
Batteries
Boundary and gooseneck base transmitters can be powered by Shure SB900
batteries or two AA batteries (included).
4/12
Active
Green*
Red
Red
(3 ft.)
ULXD6/C
1 m
60 cm
(2 ft.)
The receiver front panel displays battery charge level in hours/minutes for
Shure batteries and in bars for AA batteries. For accurate monitoring, set
Shure Incorporated
Muted
Red*
Off
Flashing red
2017/05/17
Advertisement
Table of Contents
