Test Mode - Roland Kiwi-8P User Manual

Test Mode

www.kiwitechnics.com
Test Mode
Test Mode is only used to set the
trims on the Voice board and is only
used during the initial setup.
There is a special test mode patch
number 8:8:8 which is selected
automatically when test mode is
started. This patch is like any other
in the Kiwi8P and can be edited so it
is best to leave this patch unaltered if
test mode is to be used. A power on
factory restore will also restore this
patch.
Test mode is entered by pressing
and holding the CANCEL button as
the Kiwi8P is powered on. The
display will read TEST MODE.
As each note is pushed the voice that
is sounding will display on the LEDs.
HOLD
ARP
SEQ
KEY MODE
CHORD
GLOBAL TEMPO
JX-8P Upgrade User Manual v130
42
= Voice 1
= Voice 2
= Voice 3
= Voice 4
= Voice 5
= Voice 6