RIDGID BS14002 Operator's Manual page 31

MAINTENANCE
LUBRICATION
SAW
HOUSING
All the bearings in this tool are lubricated with a sufficient
amount of high grade lubricant for the life of the unit under LOWER
BRUSH
WHEEL
normal operating conditions. Therefore no further lubrication
is required.
BRUSH
SCREW
See Figure 43.
There is a brush located inside the saw housing, next to the
lower wheel. It helps protect the tire and wheel by brushing
off saw dust. As the brush becomes worn, it will need to be
adjusted or replaced.
n Remove the screw then pull the brush off.
n Place the new brush in the groove.
n Retighten using the screw.
Fig. 43
31