Table of Contents
Advertisement
Trap IP Address2: This IP should be the same as the monitoring server's IP.
After correct setup, the IRD will pass the alarming and running information to
the monitoring server.
SFN: to enable or disable the SFN supporting.
Mac Address: Here shows the MAC address of the device. The MAC address
is fixed and not editable.
Software Version (Main Board): Here shows the Software Version of Main
Board.
Import/ Export
This page allows you to import and export configurations, Preset 1/Preset 2 or local can be
selected.
GPI Alarms Setting
In this section, you can set the alarm information to monitor the device and signal. After
setting the "Alarm Mask" on, the "GPI" item will be optional. If you set the GPI on, when
PIC-3.4- 23
PIC-3.4- 24
32
Advertisement
Table of Contents
