Table of Contents
Advertisement
625 Standard: It's fixed PAL-BGID.
L21 Captions: enable or disable CVBS caption output.
Audio:
2 analog output and 2 digital output in 1 audio output port.
Analog Output 1/Analog Output 2: 3 options for analog output, OFF, audio 1 and audio 2.
Level: audio volume can be adjusted from -14 to 0.
Digital Output 1/Digital Output 2: 4 options for digital output, OFF, Audio 1 PCM, Audio 2
PCM, Audio 1 Pass-through.
3.4.2.7 CA
In this page, user can manage the configuration setting related to the device decryption and
descrambling capability.
COMMON INTERFACE is used to interface between the pay-per-view card and
the receiver. This is a defined standard that enables the addition of Conditional
Access Module (CAM) in a DTV receiver to adapt it to different kinds of
cryptography.
o
CAM Max Bitrate: Set the max output bit rate of the CAM.
BISS: BISS(Basic Interoperable Scrambling System) is a satellite signal
scrambling system developed by the European Broadcasting Union and a
consortium of hardware manufacturers. There are two BISS Mode:
BISS-1, transmission are protected by a 12 digit hexadecimal "session key"
o
that is agreed by the transmitting and receiving parties prior to transmission.
The key is entered into both the encoder and decoder, this key then forms
part of the encryption of the digital TV signal and any receiver with
BISS-support with correct key will decrypt the signal.
o
BISS-E (E for encrypted), is a variation where the decoder has stored one
secret BISS-key entered by for example a rights holder. This is unknown to
the user of the decoder. The user is then sent a 16-digit hexadecimal code,
PIC-3.4- 21
30
Advertisement
Table of Contents
