Technalogix TP160 IRD User Manual page 25


Protocol: You can choose UDP or RTP for multicast/unicast.
 IGMP: to click the "Setting" button to get the configuration page.

IP- IGMP

IGMP Version: to choose Auto/IGMP V1/IGMP V2/IGMP V3 options.

IGMP Auto Report: to enable the auto report function.

Filter: to include or exclude the source IP address.

Source IP Address: to input the IP address to include or exclude.

Source List: the IP address added will be listed here.
3.4.2.5 Outputs

ASI
Here, you are able to set the Constant Rate of ASI signal. After configuration you need to
click submit button to enforce it.
o
Constant Rate: set ASI output bit rate.

IP(optional)
This is the main parameter of output IP streams. There are two channels for output and you
can set both of them. After configuration you need to click submit button to enforce it.
PIC-3.4- 9
PIC-3.4- 10
24