Table of Contents
Advertisement
Genlock:
In this section, you can configure the information of genlock as follow.
Reference Source: Select "External" to use genlock source or "Disable" to use internal
timing.
SD Vertical (lines)/SD Horizontal(Pixels)/SD Subcarrier(Degrees): Adjust parameters to
lock genlock source for SD decoder output.
HD Vertical (lines)/HD Horizontal(Pixels): Adjust parameters to lock genlock source for
HD decoder output.
Fail Mode:
2 CVBS output options for input source unlocked: Disable Composite and Display Raster.
SDI:
In this section, you can set Closed Caption and audio on SDI output.
SD EIA 708-B: disable or enable SD EIA708-B output.
Line: select specific line to be used for SD EIA 708-B.
SD VBI L21 Captions: disable or enable SD VBI L21 Captions.
HD EIA 708-B: disable or enable HD EIA708-B output.
Line: select specific line to be used for HD EIA 708-B.
Audio Group 1 Pair 1/Audio Group 1 Pair 2/Audio Group 2 Pair 1/Audio Group 2 Pair 2:
3 options for each SDI embedded audio, Off, Audio1 PCM and Audio2 PCM.
CVBS:
In this section, you can set detailed CVBS output.
NTSC Pedestal: you can choose Black at 7.5 IRE or Black at 0 IRE according to actual
environment.
525 Standard: It's fixed NTSC.
PIC-3.4- 20
29
Advertisement
Table of Contents
