Table of Contents
Advertisement
Enable: Enable or disable corresponding output channel
Dest IP Address: The IP address for the multicast/unicast.
Dest Port: The port of the multicast/unicast, it must stay same with the
value of the destination device.
Protocol: You can choose UDP OR RTP for multicast/unicast.
Constant Rate: to set IP output bit rate.
3.4.2.6 Decoder
Playing
This page shows Playing Program, video, audio, subtitle and teletext parameter:
Playing Program
On this interface, you can choose the Tuner, ASI or IP inputs as signal source. And set the
PIC-3.4- 11
PIC-3.4- 12
25
Advertisement
Table of Contents
