Xerox DUPLEX TRAVEL User Manual page 42

Maintenance
Caution: do attempt to calibrate the scanner with any other type of document
(i.e. white paper or a copy of the calibration page).
The calibration routine will fail and indicate the failed calibration by flashing a red LED on the
scanner. A calibration page was included with your scanner, if you do not have one available,
you can order a replacement from the Parts & Accessories page for your scanner at
www.xeroxscanners.com.
To calibrate the scanner:
1. Open the scanner's hardware properties page as described on page 31.
2. Click on the Device Settings tab.
3. Click on the Calibrate button to start the calibration utility.
User Guide
®
Xerox Duplex Travel Scanner
37