Table of Contents
Advertisement
Installation
Powering On/Off the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely connected.
3. Turn on the lamp by pressing "
4. Turn on your source (computer, notebook, video player ,etc.).
N
OTE
Turn on the
projector first and
then the signal
sources.
English...12
Powering On the Projector
The Power LED will flash red.
and the Power LED will turn blue.
1
The projector will detect your source automatically.
If the screen displays "Lock" & "Source" icons, it means the
projector locks on this source type and there is no such type of
input signal found.
If the screen displays "No Signal", please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, using the
"Source" button on the remote control or control panel to
switch.
" button on the control panel
1
Power
Advertisement
Table of Contents
