Table of Contents
Advertisement
Problem: The image is outstretched when displaying DVD.
Select appropriate aspect ratio in both DVD player and projector
OSD menu to get the correct width-height ratio of the image.
If the image is still outstretched, you will also need to adjust the aspect
ratio by referring to the following:
Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.
If you can't select 4:3 aspect ratio type on your DVD player, please
select 4:3 aspect ratio on screen menu.
Problem: Image is reversed.
Select "Image" from the OSD and adjust the projection
direction. See page 22.
Problem: Lamp burns out or makes a popping sound.
When the lamp reaches its end of life, it will burn out and may
make a loud popping sound. If this happens, the projector will
not turn on until the lamp module has been replaced. To replace
the lamp, follow the procedures in the "Replacing the Lamp".
See page 39.
Problem: LED lighting message.
Message
Standby State
Slow Flashing
(Input power cord)
Lamp lighting
Power on
Power off (Cooling)
Quick Flashing
Error (Lamp fail)
Error (Thermal fail)
Error (Fan lock fail)
Error (Over Temp.)
Error
(Lamp Breakdown)
=>Light On
Appendices
Power LED
Red
Blue
=>Light Off
Lamp LED
Temp LED
Flashing
37
... English
Advertisement
Table of Contents
