Table of Contents
Advertisement
User Controls
Zoom
Keystone + / -
Page Up (Computer mode only)
Page Down (Computer mode only)
Resync
Hide
Source
Freeze
VGA
DVI
Component
S-Video
Video
Laser Button (for PD126D only)
Language(for PD117D only)
Mouse Right Click / Mouse Left Click (for PD126D only)
English...18
Digital Zoom in/out.
Adjusts image distortion caused by tilting the projector ( 15
degrees).
Use this button to page up. This function is only available when
the projector is connected to a computer via an USB cable.
Use this button to page down. This function is only available
when the projector is connected to a computer via an USB cable.
Automatically synchronizes the projector to the input source.
Momentarily turns off the video. Press "Hide" to hide image,
press again to restore display of the image.
Press "Source" to choose RGB, Component-p, Component-i,
S-Video, Composite Video, DVI-D and HDTV sources.
Press "Freeze" to pause the screen image.
Press "VGA" to change source to VGA-In connector. This connector
supports Analog RGB, YPbPr (480p/576p/720p/1080i), YCbCr
(480i/576i) and RGB sync.
Press "DVI" to change source to DVI connector. This connector
supports Digital RGB, Analog RGB, YPbPr (480p/576p/720p/
1080i) and YCbCr (480i/576i).
Press "Component" to change source to component connector.
This connector supports YPbPr (480p/576p/720p/1080i) and
YCbCr (480i/576i).
Press "S-Video" to change source to S-Video source.
Press "Video" to change source to Composite Video source.
Aim the remote at the viewing screen, press and hold this button
to activate the laser pointer.
Choose the multi-lingual OSD menu.
These functions are the same as a mouse of PC or Mac.
Advertisement
Table of Contents
