Adjust image distortion caused by tilting projection. (
Use this function to choose your desired aspect ratio.
The factory default setting.
When you select this function, the projector reverses the image so you can project
behind a translucent screen.
When you select this function, the projector turns the image upside down for
When you select this function, the projector reverses and turns the image upside
down at same time. You can project from behind a translucent screen with ceiling
Adjusts the sharpness of the image.
Auto : Keep the image with original width-height ratio and maximize the
image to fit native horizontal or vertical pixels.
The input source will be scaled to fit the width of the screen.
The input source will be scaled to fit the projection screen.
Crop a 480p video signal to 800x480 resolution (for SVGA model).
to decrease the sharpness.
to increase the sharpness.