Midi Setup; Auto Power Off - Medeli DD635 Owner's Manual

AW_DD635_manual_G01_180521.pdf 24 18/5/21 10:03
Settings

MIDI Setup

1.
Press the [KIT] button, then press the [MENU] button.
2.
Press the [∧]/[∨] buttons or [F1]/[F2] buttons to select "Midi
Setup", then press [F3 (ENTER)] to enter MIDI SETUP menu.
3.
Press the [∧]/[∨] buttons or [F1]/[F2] buttons to select a parameter
to edit, then use the data dial or [<]/[>] buttons to change the
setting. After editing, press [F3 (ENTER)] to save, otherwise, the
edited data will be lost after power off.
MIDI Setup parameters and their range:
Parameter
Soft Through
Local Control
GM Mode
Prog Change RX
C
M
Y
Prog Change TX
CM
MY
CY
CMY
K

Auto Power Off

This function will automatically turn off the power after a period of time
when the module is not in use.
Note: This function is not available during song playback, during
recording or when MIDI IN jack is receiving data.
1.
Press the [KIT] button, then press the [MENU] button.
2.
Press the [∧]/[∨] buttons or [F1]/[F2] buttons to select "Option",
then press [F3 (ENTER)] to enter OPTION menu.
3.
Press the [∧]/[∨] buttons or [F1]/[F2] buttons to select a parameter
to edit, then use the data dial or [<]/[>] buttons to change the
setting. After editing, press [F3 (ENTER)] to save, otherwise, the
edited data will be lost after power off.
Option parameters and their range:
Parameter
Auto Power Off
Display Contrast
24
Range Description
ON, OFF Message received from MIDI IN will be transmit-
ted to MIDI OUT.
ON, OFF ON: Performance MIDI events from pads will be
transmitted to the module and MIDI OUT.
OFF: Performance MIDI events from pads will be
transmitted to MIDI OUT only.
ON, OFF ON: MIDI channel 10 will respond GM drum kit.
OFF: MIDI channel 10 will respond local drum kit.
ON, OFF ON: MIDI channel 10 will respond the program
change MIDI message.
OFF: MIDI channel 10 will ignore the program
change MIDI message.
ON, OFF ON: Send program change MIDI message from
MIDI channel 10 when changing the local drum
kit number.
OFF: Do not send program change MIDI
message from channel 10 when changing the
local drum kit number.
Range Description
OFF, OFF: Auto power off is disabled.
30, 60 30, 60: The module will shut down after 30 min or
60 min when it is not used.
1~16 Adjust the contrast ratio of display.
MENU
KIT
F1 F2
MENU
KIT
F1 F2