Medeli DD635 Owner's Manual page 2

AW_DD635_manual_G01_180521.pdf 2 18/5/21 10:03
INFORMATION FOR YOUR SAFETY!
The normal function of the product may be disturbed by
Strong Electro Magnetic Interference. If so, simply reset
the product to resume normal operation by following the
owner's manual. In case the function could not resume,
please use the product in other location.
Thank you for purchasing this instrument. Please check
all the items listed below are included in the package.
Drum Module (x1)
Drum Pad (x4)
Cymbal Pad (x3)
Kick (Pad + Pedal) (x1 set)
Pedal (Hi-hat) (x1)
Drum Stand (x1 set)
Connection Cable (x1 set)
Drumsticks (x1 set)
C
AC Adaptor (x1)
M Owner's Manual (x1 set, Chinese and English)
Setup Manual (x1 set, Chinese and English)
Y
Warranty (x1)
CM
MY
CY
CMY
K
Never attempt to disassemble or modify any compo-
nents of the instrument; doing so may result in electric
shock, fire, physical injury or malfunction.
Never sit or stand on the Drum Stand, doing so may
cause the stand falling over or being damaged, and
consequently might lead to physical injury.
Special caution should be paid when come into contact
with screws used to affix Kick Pad and Pedal (Hi-hat),
as the sharp point of these screws may cause physical
injury.
Securely tighten all clamps, bolts and screws. Make
sure to firmly tighten any nut that is loose. Any loose
connection may result in drum pad and/or drum stand
falling over, and consequently might lead to physical
injury.
Carefully place the connection cable to avoid injury to
anyone who may be tripped over.
2
CAUTION
Packing List
Assembling
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe place for future reference.
Power Supply
Please connect the designated AC adaptor to an AC outlet
of the correct voltage.
Do not connect it to an AC outlet of voltage other than that
for which your instrument is intended.
Unplug the AC power adaptor when not using the instru-
ment, or during electrical storms.
Connections
Before connecting the instrument to other devices, turn off
the power to all units. This will help prevent malfunction and
/ or damage to other devices.
Location
Do not expose the instrument to the following conditions to
avoid deformation, discoloration, or more serious damage:
Direct sunlight
Extreme temperature or humidity
Excessive dusty or dirty location
Strong vibrations or shocks
Close to magnetic fields
Interference with other electrical devices
Radios and televisions placed nearby may experience
reception interference. Operate this unit at a suitable
distance from radios and televisions.
Cleaning
Clean only with a soft, dry cloth.Do not use paint thinners,
solvents, cleaning fluids, or chemical-impregnated wiping
cloths.
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metallic, or other objects into the instru-
ment. If this happens, remove the electric plug from the
outlet. Then have the instrument inspected by qualifie
dservice personnel.
Disconnect all cables before moving the instrument.