Table of Contents
Advertisement
Initial Scanner Setup
Depending on how the original
is positioned, the scan area will
be as follows:
The range of possible original
sizes and scan sizes is as fol-
lows:
• Original Size
X1: 210-914 mm (8.3"-36.0")
Y1: 210-15000 mm (8.3"-11.7")
9
• Scan Area
X3: 10-914 mm (0.4"-36.0")
Y3: 10-15000 mm (0.4"-590.6")
Keep the scan area settings
within these ranges.
D When all dimensions are en-
tered, press [OK].
100
E Make sure that the area speci-
fied in step D D D D (X3 and Y3) is
shown in the [Custom Size]
field, and then press [OK].
Automatically Detecting the
Vertical Measurement (Length)
A Press [Auto Detect].
AGG002D
B Using the number keys, enter
the horizontal measurement
(width) of the original.
Select [X1], enter the horizontal
measurement, and then press
the { { { { #} } } } key.
When you automatically detect
t h e v e r t i c a l m e a s u r e m e n t
(length) you can specify only
[X1]. [X2] is set to "0", and [X3] is
set to the same value as [X1].
Advertisement
Table of Contents
