Sending Scan Files By Scan To Folder; Procedure For Sending By Scan To Folder - Ricoh Type 480 Scanner Reference

Sending Scan Files by Scan to Folder

Sending Scan Files by Scan to Folder
Procedure for Sending by
Scan to Folder
A scan file is sent after scan settings
and destinations are specified.
A A A A
Press the { { { { Scanner} } } } key.
3
Note
❒ The illustration is an example.
The actual appearance may be
different.
B B B B
Make sure that no previous set-
tings remain.
Note
❒ If a previous setting remains,
press the { { { { Clear Modes} } } } key.
C C C C
Make settings for the original, such
as orientation and output tray.
Reference
p.75 "Specifying the Orienta-
tion and Output Tray of the
Original"
D D D D
Make the scan settings.
34
Reference
There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for
scanning. For details, see
p.73 "Specifying Scan Set-
tings".
• Recall registered settings. For
details, see p.80 "Programs".
E E E E
If the network delivery scanner
screen appears, switch to the Scan
to Folder screen.
A Press [
B Press [Switch Destination List].
ZZZ606S
C Press [E-mail].
D Press [Exit].
The e-mail screen appears.
E Press [
The Scan to Folder screen ap-
pears.
F F F F
Specify the destination folder.
You can specify the destination
folder in the following ways:
• Select it from the destination list.
• Specify its registration number.
].
].