Table of Contents
Advertisement
Message
[Exceeded the maximum allowable characters for a scan
mode.]
[Enter within 40 characters.]
[Exceeded the maximum number of scan modes to save.]
[Reenter after deleting.]
[Insufficient memory. Reduce resolution, original size, or
scanning area.]
[No User Code is registered. Consult your system admin-
istrator.]
[Paper misfeed has occurred.]
[Please call your service representative.]
[Scanner function is not available. Check the device.]
[Scanner is in use by another function.]
[Scanner is not ready yet.]
[Scanning has been aborted.]
[Standby time reached.]
[The device's authentication service cannot be per-
formed.]
[The login user name, login password, or driver encryp-
tion key entered is invalid.]
[The scanning area does not match the original.]
[The start position of the scanning area does not match
the original.]
[This mode cannot be changed/deleted.]
When a Message Is Displayed
Causes and solutions
A maximum of 40 characters can be en-
tered as the name of a scanning mode. Re-
enter the name within this limit.
A maximum of 48 scanning modes can be
registered. Delete unnecessary scanning
modes, and try registering again.
The computer does not have enough
memory. Reduce the resolution or size of
scanning. Alternately, try scanning again
after closing any other applications in
use.
Access is restricted with user codes. Con-
sult the system administrator of the ma-
chine.
An original has been misfed. Remove the
original.
An unrecoverable error has occurred in
the machine. Call your service represent-
ative.
Call your service representative.
The machine is being used for functions
other than the scanner function, such as
the copier function. Try accessing the ma-
chine a little later.
Check the cover is not open.
Scanning has been stopped. Try scanning
again.
Load an original within the time limit
specified in [Standby Time:].
The machine is editing the address book.
Wait a while, or contact the machine ad-
ministrator.
• Check the login user name, login pass-
word, and driver encryption key.
• Permission to use this function has not
been granted. Contact the machine
administrator.
Check the location of the original.
Check the location of the original.
The standard scanning modes, [Standard],
and [Diazo type], cannot be registered or
deleted.
8
93
Advertisement
Table of Contents
