Bosch MUC68 Series Instruction Manual page 23

www.devicemanuals.eu/
Note: If [ K ] or [ L ] does not light up, the
steam pressure function is not available for
the selected programme.
2. Press button L to switch between [ K ]
and [ L ].
3. If the desired steam pressure is
displayed, press button G.
The preparation programme is started with
the set steam pressure function.
Note: These settings are not saved. If this
preparation programme is selected again,
the set steam pressure function will be
shown in the display once more.
my mode (manual)
Quick setting mode for customising the
steam pressure function, preparation time
and temperature setting for a cooking
process.
In function selection mode, button B and
the indicator [ my mode ] are permanently lit.
Button G flashes. "00:00" is shown in the
display.
Note: In order to switch on the steam
pressure function, the pressure locking
handle must be closed (N). The indicator
[ K ] lights up.
Setting the preparation time
1. Press button F once.
"00:00" flashes in the display.
2. Keep pressing button F until the desired
preparation time is displayed.
Setting the preparation temperature or
steam pressure
3. Without steam pressure function:
The pressure locking handle must be
opened (M). Press button C once.
"0000" flashes in the display. Button C
must then be pressed repeatedly until
the desired preparation temperature is
displayed.
or
With steam pressure function: The
pressure locking handle must be
closed (N). Press button L to switch
between [ K ] and [ L ].
Customised setting options
4. Press button G to start with the
selected settings.
The appliance heats up the pan until the
target temperature or the steam pressure is
reached.
Once the target temperature or steam
pressure is reached, the lines go out and
the next preparation time is shown in the
display. The preparation process starts
automatically.
recipe 1 / recipe 2 –
saving personal preparation
programmes
Personal preparation programmes with
customised time / temperature and steam
pressure function can be saved under the
memory locations [ recipe 1 ] and [ recipe 2 ].
Notes:
■ If you have not previously saved any
personal preparation programmes, the
display does not show any values.
■ In order to switch on the steam pressure
function, the pressure locking handle
must be closed (N).
1. In function selection mode, press
button D once.
The LED [ recipe 1 ] lights up. The pre-
configured preparation time is shown in the
display.
Saving the preparation time:
2. Press button F once.
The display flashes. LED 1 (preparation
step 1) lights up in the control panel.
3. Keep pressing button F until the desired
preparation time is displayed.
When button F is briefly pressed, the
preparation time is increased by 1 minute.
When button F is pressed for a longer
period, the preparation time is increased
by 10 minutes. The time increases up to
the pre-configured maximum value and
then returns to the pre-configured minimum
value.
en
23