Table of Contents
Advertisement
www.devicemanuals.eu/
en
Preparation
The preparation process starts automati-
cally. The preparation time counts down.
Once the preparation time is completed,
an audible signal sounds, the display
flashes and shows "P". Steam auto-
matically escapes from the appliance
intermittently to reduce the pressure in
the appliance interior.
W Risk of scalding!
Never bend over the appliance while steam
is escaping from it!
When the pressure in the appliance interior
has been completely reduced, the indicator
[ finished ] and button G light up or the keep
warm function is activated.
A rectangle lights up in the display (dotted
lines). The preparation programme is
completed.
7. Open the appliance. Open the pressure
locking handle for this purpose (M)
and press the opening button on the
basic appliance.
Notes:
■ Never use force to open the appliance!
■ Always shake the appliance gently
before opening in order to dissolve any
steam bubbles that may have formed in
the food and to prevent blocking.
■ The pressure locking handle can be
easily opened when the steam has
completely escaped from the appliance
interior and the appliance is fully
depressurised.
18
■ Automatic steam release can take some
time. In order to accelerate the process
or if the appliance is not completely
depressurised, the steam can also be
released manually. X "Release steam
manually" see page 18
8. Serve the prepared meal.
W Risk of scalding!
■ The pan and any inserts that are used
may be very hot. Always use suitable
handles or oven gloves.
Caution!
Condensation is formed during cooking.
Empty the condensation tank regularly.
Notes:
■ The preparation programme can be
stopped at any time using button H.
The appliance subsequently switches
to function selection mode. Before the
appliance can be opened, the steam in
the appliance interior must be released
manually. X "Release steam manually"
see page 18
■ Certain preparation programmes
consist of several preparation steps.
X "Multiple preparation steps" see
page 20
Release steam manually
Steam can also be released manually in the
following cases:
■ If automatic steam release is to be
accelerated at the end of a preparation
programme.
■ If a preparation programme has been
aborted.
■ If the pressure locking handle cannot
be opened because the appliance is not
completely depressurised.
W Risk of scalding!
When pressing the steam release button,
hot steam escapes from the steam outlet
under high pressure. Never bend over the
appliance while the steam release button is
being pressed!
Advertisement
Table of Contents
